Spring lawn mower maintenance is essential for keeping your equipment in top shape and your lawn looking its best. After months of winter storage, your mower needs a proper tune-up to ensure reliable performance and clean cuts all season long. Here’s a step-by-step checklist to get your mower ready for action.
Step 1: Inspect for Damage
Start with a full inspection. Look for rust, cracks, loose bolts, frayed wires, or worn belts. Catching small problems early prevents bigger issues later in the season.
Step 2: Clean the Deck and Blades
Caked-on grass clippings trap moisture and cause rust. Disconnect the spark plug, tip the mower safely, and clean the underside with a scraper and mild detergent. Let it dry completely.
Step 3: Change the Oil
Fresh oil improves performance and extends engine life. Warm the engine, drain old oil, and refill with the type specified in your mower’s manual. Change oil every spring or after 25-50 hours of use.
Step 4: Check the Air Filter
A clogged air filter reduces power and increases fuel use. Wash and oil foam filters, or replace paper ones if dirty.
Step 5: Replace the Spark Plug
A worn spark plug makes starting harder. Replace it each season, setting the gap per the manufacturer's specs.
Step 6: Replace Old Fuel
Old gas causes hard starts. Drain leftover fuel, check fuel lines for cracks, and refill with fresh gasoline. Add stabilizer if you won’t use it all soon.
Step 7: Sharpen or Replace Blades
Dull blades rip grass, leaving brown edges. Sharpen with a file and check balance, or replace if they’re chipped or bent.
Step 8: Lubricate Moving Parts
Apply oil or silicone spray to wheels, pivot points, height adjusters, and cables. Avoid over-lubricating to prevent buildup of grime.
Step 9: Test Battery and Cables
If your mower has a battery, test the voltage (should be 12.6V when charged), clean the terminals, and replace if it won’t hold a charge.
Step 10: Check Tire Pressure
Even tire pressure ensures a level cut. Use a gauge and match the pressure listed in your mower’s manual.
Step 11: Set the Cutting Height
Adjust your cutting height to 2.5–3 inches. Test the levers for smooth movement and balance across the deck.
Step 12: Do a Test Run
Start the mower and listen for odd noises. Check throttle response and verify everything is running smoothly before your first mow.
Conclusion
A little spring lawn mower maintenance goes a long way. These simple steps will keep your mower dependable and your lawn looking sharp. For expert service or full lawn care support, reach out to Mile High Lifescape.
🌏 Contact Us
Mile High Lifescape
Address: 1007 S Federal Blvd, Denver, CO 80219, US
Phone: 1-303-877-9091
Website: https://milehighlifescape.com/
Email: hello@milehighlifescape.com
Google Maps: https://www.google.com/maps?cid=8131554802714482277
Frequently Asked Questions (FAQs)
How often should lawn mower oil be changed?
Every spring or after 25–50 hours of use.
What kind of fuel should I use?
Fresh unleaded gas with up to 10% ethanol and an 87 octane rating.
Why won’t my mower start?
Check the fuel, spark plug, air filter, and battery if equipped.
When should I sharpen mower blades?
At least once a year or if grass appears shredded after mowing.
Can I use last year’s gas?
No. Always start the season with fresh gasoline to avoid engine issues.
No comments:
Post a Comment